COLORBOND steel boundary fence along a suburban backyard
Colorbond fencing

Colorbond Fencing Campbelltown

COLORBOND® steel boundary fences installed across Campbelltown and Macarthur from $92 per metre. All 15 colours, 1.5m to 2.1m heights, plinths for sloping blocks, height extensions and matching gates.

  • 1.8m from $92/m installed
  • Up to 15-year BlueScope warranty
  • Free on-site measure

Colorbond fencing in Campbelltown at a glance

Installed price
$92 – $135 per metre (1.8m)
Panel heights
1.5m, 1.8m and 2.1m
Colours
15 COLORBOND® colours
Lifespan
20 to 30 years
Material warranty
Up to 15 years (BlueScope)
Typical install
One day for a 20m fence
The material

What Is Colorbond Fencing?

Colorbond fencing is a steel boundary fence made from COLORBOND® steel, a pre-painted, metallic-coated steel made in Australia by BlueScope. Each panel has steel posts, a top and bottom rail, and profiled infill sheets. It won’t rot, warp or attract termites, and it never needs painting.

COLORBOND steel starts as steel sheet with a metallic coating that resists corrosion. A paint finish is then baked on at the factory. Fence manufacturers such as Lysaght, Stramit, Stratco and Metroll roll that steel into their own panel profiles, so the look varies slightly by brand. Your quote names the brand and profile before you commit.

It is the most common boundary fence in Campbelltown because it suits the area’s newer estates and established streets alike. It gives full privacy with no gaps between sheets, and it holds its colour for decades. Many profiles also look identical from both sides, which neighbours appreciate.

The parts of a Colorbond fence

  • Posts are set in concrete footings, usually about every 2.35m.
  • Top and bottom rails run between the posts and hold the sheets in place.
  • Infill sheets are the profiled steel panels that give the fence its privacy.
  • Plinths are optional. They sit under the panels to close gaps and hold back soil on sloping ground.
  • Extensions are optional. A lattice or slat topper adds height above the panel.
Close-up of a COLORBOND steel fence showing the infill profile, top rail and post
Posts, rails and infill sheets are all made from COLORBOND steel in the same colour.
Prices

How Much Does Colorbond Fencing Cost in Campbelltown?

A standard 1.8m Colorbond fence in Campbelltown costs $92 to $135 per metre installed, including GST. A 1.5m fence costs $85 to $110 per metre and a 2.1m fence costs $115 to $160 per metre. Plinths, old fence removal and gates are priced separately.

Colorbond fence, supplied and installed, per metre (guide prices incl. GST)
HeightInstalled priceBest for
1.5m$85 – $110Low side fences and returns behind the building line
1.8m (standard)$92 – $135Most side and rear boundaries in Campbelltown
2.1m$115 – $160Extra privacy on busy roads or overlooked blocks. Usually needs council approval

Scroll sideways to see the full table.

Common extras (guide prices incl. GST)
ExtraPrice
Concrete plinths on sloping ground$25 – $45 per metre
Height extension (about 300mm, lattice or slat)$45 – $75 per metre
Remove and dispose of the old fence$20 – $40 per metre
Single COLORBOND pedestrian gate$350 – $650 each
Double COLORBOND driveway gates$900 – $1,600 per pair

Worked example: a 20m back fence

A typical Campbelltown rear boundary is around 20 metres. Here is what a new 1.8m Colorbond fence costs, including removal of the old timber fence, and what each neighbour pays when the cost is shared.

20m of 1.8m Colorbond
$1,840 – $2,700
Remove the old fence
$400 – $800
Total job
$2,240 – $3,500
Each neighbour pays (50/50)
$1,120 – $1,750

What the price per metre includes

  • COLORBOND steel panels in any of the 15 colours
  • posts set in concrete footings
  • top and bottom rails
  • installation on a clear, level site
  • removal of offcuts and packaging

What changes the price

  • Slope: plinths and stepped panels add material and labour
  • Height: 2.1m panels and extensions cost more per metre
  • Access: narrow side paths or no machine access slow the job
  • Ground: rock, tree roots or old footings take longer to dig
  • Length: short runs cost more per metre than long ones

Guide prices for Campbelltown and the Macarthur region, October 2026. Your written quote after the free on-site measure is the firm price. See how Colorbond compares with other fence types on our services page.

Want an exact price for your fence line?

Book a free on-site measure. You get a written, itemised quote, usually within 24 hours.

Colours

Which Colorbond Colours Can You Choose?

The COLORBOND® fencing range has 15 colours, from light Surfmist and Shale Grey to dark Ironstone and Monument. Every colour costs the same, and the posts, rails and sheets all match. On a dividing fence, agree on the colour with your neighbour before ordering.

  • Surfmist
  • Evening Haze
  • Shale Grey
  • Paperbark
  • Dune
  • Domain
  • Riversand
  • Bluegum
  • Pale Eucalypt
  • Wollemi
  • Wilderness
  • Basalt
  • Woodland Grey
  • Ironstone
  • Monument

Screen colours are approximate. Always choose from a physical sample, outdoors in daylight.

Light colours

Surfmist, Shale Grey and Evening Haze make small yards feel bigger and stay cooler to the touch in summer.

Mid tones

Dune, Paperbark and Riversand blend with brick and rendered homes, and hide dust better than very light or very dark colours.

Dark colours

Monument, Woodland Grey and Basalt are the most popular in Campbelltown’s newer estates. They frame gardens and recede into the background.

Heights and approvals

What Heights Do Colorbond Fences Come In?

Colorbond fences come in three standard panel heights: 1.5m, 1.8m and 2.1m. 1.8m is the standard for side and rear boundaries, and it is also the maximum height for a side or rear fence that is exempt from council approval in NSW residential zones.

COLORBOND fence panels at 1.5m, 1.8m and 2.1m. 1.8m is the usual limit for side and rear fences without council approval in NSW. 1.5m 1.8m standard 2.1m 1.8m exempt limit (side & rear)
Taller fences usually need approval from Campbelltown City Council.
Colorbond fence heights and NSW approval
HeightCouncil approvalTypical use
1.5mUsually exemptLow side fences and returns
1.8mUsually exempt (side and rear)Standard boundary fence
2.1mUsually needs approvalExtra privacy

Scroll sideways to see the full table.

Under the NSW Codes SEPP, side and rear fences up to 1.8m are generally exempt development in residential zones. Fences facing a road are limited to 1.2m. On a sloping block, a stepped fence can reach 2.2m above ground at each step. Heritage items, heritage conservation areas and flood-control lots have extra rules, so check with Campbelltown City Council before building anything above 1.8m.

Sloping blocks

Can Colorbond Be Installed on a Sloping Block?

Yes. Colorbond fences are installed on sloping blocks either stepped, with level panels that step down the slope and concrete plinths filling the gap underneath, or raked, with panels that follow the ground line. Stepping with plinths is the most common choice in Campbelltown.

Two ways to fence a slope: stepped panels with concrete plinths filling the gap underneath, or raked panels that follow the ground. Stepped + plinthsRaked plinths
Stepped: level panels step down the slope, with plinths filling the gap underneath. Raked: panels follow the ground line for a continuous look.

Why plinths matter

A plinth is a concrete or steel strip that sits under the bottom rail. It closes the triangle of gap left when a level panel steps down a slope, stops pets getting through, and holds back soil. COLORBOND rails and infill sheets must not sit in concrete or soil, so plinths also protect the steel from moisture and corrosion.

Streets in Glen Alpine, Kentlyn, Minto Heights and St Helens Park often fall several hundred millimetres across a single boundary. Where the ground drops more than a plinth can hold, a retaining wall may be needed first. The installer checks this at the measure, so it is on the quote, not added later.

COLORBOND fence stepped down a sloping block with concrete plinths under each panel
Plinths cost $25 to $45 per metre, depending on how much the ground falls.
Height extensions

Can You Add Height to a Colorbond Fence?

Yes. A Colorbond height extension adds a lattice, slat or solid topper, usually about 300mm high, on top of an existing or new fence. It costs $45 to $75 per metre. Because the total height then goes above 1.8m, it usually needs council approval first.

When an extension makes sense

  • a two-storey home or a deck next door overlooks your yard
  • you want to screen a pool, spa or outdoor area
  • your existing fence is sound and you don’t want to replace it
  • you want a decorative finish, such as lattice or slats in a matching colour

Extensions are fixed to extended posts or brackets on the existing posts, and they come in the same 15 colours as the fence. If the fence is shared, the neighbour needs to agree, and the person who asks for the extra height usually pays for it.

A 1.8m COLORBOND fence with a 300mm lattice height extension fitted along the top. +300mm 1.8m
A 300mm lattice extension on a 1.8m fence gives a total height of about 2.1m.
COLORBOND fence with a lattice height extension along the top
Matching gates

Do You Install Matching Colorbond Gates?

Yes. Colorbond gates are framed in steel and clad with the same infill sheets as the fence, so they match in any of the 15 colours. A single pedestrian gate costs $350 to $650 installed, and double driveway gates cost $900 to $1,600 a pair.

  • Single gates, about 900mm to 1m wide, for side paths and bin access
  • Double gates for driveways, trailers and boat access
  • Hardware including drop bolts, latches and lockable options
  • Sliding and automated gates, quoted on site

A gate that forms part of a pool barrier has to be self-closing and self-latching, so tell the installer if a pool is nearby.

Single COLORBOND steel gate matching the boundary fence
Dividing fences

Who Pays for a Colorbond Dividing Fence?

Under the Dividing Fences Act 1991 (NSW), neighbours usually split the cost of a sufficient dividing fence 50/50. A 1.8m Colorbond fence is a common choice in Campbelltown streets. If one neighbour wants something extra, such as a 2.1m fence or an extension, they usually pay the difference.

1. Talk first

Agree on the height, colour and profile with your neighbour. Remember a Colorbond fence shows on both sides.

2. Give a fencing notice

Put the proposal in writing with the itemised quote. Your neighbour has one month to respond.

3. If you can’t agree

Try free mediation through Community Justice Centres, or apply to NCAT or the Local Court for a fencing order.

More detail on notices and disputes is in our fencing FAQs.

Pools

Can a Colorbond Fence Be Part of a Pool Barrier?

Yes, a Colorbond boundary fence can form part of a pool barrier in NSW if it is at least 1800mm high and has no climbable footholds on the pool side. Pool water is corrosive and isn’t covered by the BlueScope warranty, so keep splash and pool chemicals off the fence.

Keep pots, pool pumps and furniture away from the fence so children can’t climb it, and hose off any splashes from salt or chlorinated water. A pool certifier checks the whole barrier, including the boundary section, when the pool is inspected or the property is sold or leased.

Pools must also be registered on the NSW Swimming Pool Register (opens in a new tab).

Warranty and care

What Warranty Comes With a Colorbond Fence?

A Colorbond fence carries three warranties: up to 15 years from BlueScope on the COLORBOND steel, a structural warranty from the fence manufacturer, and a workmanship warranty from the installer. A correctly installed Colorbond fence lasts 20 to 30 years in Campbelltown conditions.

15 yrs

Steel material warranty

From BlueScope, against corrosion, subject to application and eligibility. Campbelltown is well over 1km from the coast, which is one of the conditions.

10 yrs

Structural warranty

Fence system manufacturers commonly cover the structure of their panels. Terms vary by brand, and your quote names the brand.

1–3 yrs

Workmanship warranty

From the licensed installer who builds your fence, set out in writing in your contract.

What can void a Colorbond warranty

  • Painting the fence. It voids the warranty on the sheets, posts and rails
  • Rails or sheets touching concrete or soil. Only the posts go in concrete
  • Pool water and chemicals splashing on the steel
  • A marine or industrial location within 1km of the fence

How to look after it

  • Hose it down every six months in areas that don’t get regular rain
  • Keep garden beds, mulch and soil from building up against the panels
  • Clear leaves and debris from the bottom rail
  • Fix scratches with the manufacturer’s touch-up paint only
Installation

How Is a Colorbond Fence Installed?

A Colorbond fence is installed in five steps: measure and set out the line, remove the old fence, set the posts in concrete, fit the rails and infill sheets, then clean up. A 20m fence on a level block is usually finished in one day.

  1. Measure and set out

    The installer measures the run, checks the slope and pegs the line, using the boundary pegs or survey marks.

  2. Remove the old fence

    The old timber or steel fence is taken down and removed from site, if it’s included in your quote.

  3. Set the posts

    Holes are dug and the posts are set plumb in concrete footings at the right spacing for the panels.

  4. Fit rails and sheets

    Rails go between the posts, then the infill sheets and any plinths, extensions or gates are added.

  5. Check and clean up

    The line and gates are checked with you, and offcuts and packaging are taken away.

Service area

Where Do We Install Colorbond Fencing?

We arrange Colorbond fence installation across the Campbelltown local government area and the wider Macarthur region, from Glenfield in the north to Appin in the south. Every job is quoted after a free on-site measure by a licensed local installer who works in your suburb.

  • Campbelltown
  • Leumeah
  • Bradbury
  • Ruse
  • Ambarvale
  • Rosemeadow
  • St Helens Park
  • Glen Alpine
  • Airds
  • Kentlyn
  • Ingleburn
  • Minto
  • Glenfield
  • Macquarie Fields
  • Eagle Vale
  • Raby
  • Narellan
  • Mount Annan
  • Camden
  • Gregory Hills
  • Oran Park
  • Appin

Don’t see your suburb? See all 48 suburbs on our service areas page, or call to check.

Colorbond questions

Colorbond Fencing FAQs

Straight answers to the Colorbond questions Campbelltown homeowners ask most, on painting, rust, council approval, retaining walls, wind and repairs. For general fencing questions, see our full fencing FAQs.

Is a Colorbond fence the same on both sides?

The colour is the same on both sides, and many COLORBOND fence profiles look identical from both sides too, so you and your neighbour get the same finish. If the fence is shared, choose the colour and profile together before it is ordered.

Can I paint a Colorbond fence?

It isn’t recommended. Painting a Colorbond fence voids the warranty on the sheets, posts and rails, and paint applied by hand is less durable than the factory-baked finish. For scratches, use the manufacturer’s touch-up paint sparingly.

Does Colorbond fencing rust?

Colorbond is metallic-coated steel with a baked-on paint finish, designed to resist rust in normal conditions. Rust usually starts where soil, mulch or concrete sits against the rails or sheets, where pool water splashes on the steel, or at deep scratches. Keeping the base clear prevents most problems.

Do I need council approval for a 2.1m Colorbond fence?

Usually, yes. In NSW residential zones, side and rear fences are generally exempt from approval only up to 1.8m. A 2.1m fence, or a 1.8m fence with a height extension, usually needs approval from Campbelltown City Council. Check before you order.

Can a Colorbond fence go on top of a retaining wall?

Yes, if the wall is sound. The posts are either set into the ground behind the wall or fixed to it with brackets, depending on how the wall is built. The combined height can affect whether council approval is needed, and a failing wall should be repaired first.

What is the difference between Colorbond and Zincalume fencing?

ZINCALUME® steel is the same kind of metallic-coated steel without the paint, so it has a plain silver finish and usually costs a little less. COLORBOND steel adds a baked-on paint finish in 15 colours. Most Campbelltown homeowners choose Colorbond for the colour.

Will a Colorbond fence stand up to strong winds?

Colorbond fence systems are engineered and tested to Australian Standards, and they handle strong wind well when the posts are set at the correct depth and spacing. After a severe storm, damaged sheets or panels can usually be replaced without rebuilding the whole fence.

Can you replace just one damaged Colorbond panel?

Usually, yes, as long as the posts are sound. A new sheet may look slightly brighter than a fence that has weathered for years. If your colour has since left the range, the installer suggests the closest current match.

Free, no obligation

Get a Free Colorbond Fencing Quote in Campbelltown

Send the form and we call back the same working day to book your free on-site measure. Photos help us quote faster — attach one if you have it.

  1. 1
    You send the form

    Takes about 40 seconds.

  2. 2
    We call back same working day

    To book a measure that suits you.

  3. 3
    Fixed quote in 24 hours

    Itemised, in writing. The price does not move.

Rather talk it through?

Call 0432 666 474

Request your free measure

Fields marked * are required.

Mobile or landline — whichever suits.
A rough pace-out is fine.
Optional. Speeds the quote up considerably.

We quote free, and no obligation follows it. We pass your details to one licensed local fencing contractor to quote your job, and never sell them. Read our privacy policy.