Timber paling fence along a suburban backyard
Timber fencing

Timber Fencing Campbelltown

Timber paling fences built across Campbelltown and Macarthur from $92 per metre. Treated pine or hardwood, butted or lapped and capped, on H4 treated or galvanised steel posts.

  • Paling fences from $92/m
  • H4 treated posts as standard
  • Free on-site measure

Timber fencing in Campbelltown at a glance

Installed price
From $92 per metre (1.8m)
Styles
Butted, lapped and capped, exposed post
Timber
Treated pine or hardwood
Posts
H4 treated pine or galvanised steel
Standard height
1.8m
Typical install
One to two days
What we build

What Timber Fences Do We Install in Campbelltown?

We install three timber paling fence styles across Campbelltown: butted paling, the budget-friendly standard; lapped and capped, with overlapping palings and a capping rail for full privacy; and exposed post, a feature style with the posts on show. All are 1.8m as standard.

Butted paling

from $92/m

Palings sit side by side on two or three rails. The lowest-cost timber fence, and the easiest to repair one board at a time.

Lapped and capped

from $115/m

Palings overlap so no gaps open as the timber shrinks, with a capping rail on top and a kickboard at the base. The most popular choice in Campbelltown.

Exposed post

from $190/m

Posts and rails are left on show for a solid, architectural look. Usually built in hardwood for street-facing and feature fences.

How a timber paling fence is built

A timber paling fence is made of vertical boards called palings, nailed to two or three horizontal rails that run between posts set in concrete. A capping rail protects the top of the palings from rain, and a kickboard or plinth board along the base keeps them off the ground.

  • Posts and plinth boards go in or near the ground, so they are H4 treated pine (or galvanised steel posts)
  • Palings, rails and capping stay above ground and are H3 treated pine or hardwood
  • Treatment levels follow Australian Standard AS 1604
  • Every fence is built to the height and boundary line confirmed at your measure
Lapped and capped timber paling fence with a capping rail along the top
Lapped and capped: overlapping palings, a capping rail and a kickboard.
Prices

How Much Does a Timber Fence Cost in Campbelltown?

A 1.8m treated pine paling fence in Campbelltown costs $92 to $120 per metre installed, including GST. Lapped and capped treated pine costs $115 to $150 per metre, and hardwood costs $135 to $200 per metre. Galvanised posts, plinth boards, removal and gates are priced separately.

Timber paling fence, 1.8m, supplied and installed, per metre (guide prices incl. GST)
StyleInstalled priceBest for
Treated pine, butted palings$92 – $120Budget boundary fences and rentals
Treated pine, lapped and capped$115 – $150Full privacy at a sensible price
Hardwood, butted palings$135 – $175A longer-lasting standard fence
Hardwood, lapped and capped$160 – $200Premium privacy and longest palings
Exposed-post feature fence$190 – $220Street-facing and feature fences

Scroll sideways to see the full table.

Common extras (guide prices incl. GST)
ExtraPrice
Galvanised steel posts instead of timber$15 – $25 per metre
Plinth board on sloping ground$20 – $40 per metre
Remove and dispose of the old fence$20 – $40 per metre
Single timber pedestrian gate$350 – $650 each
Double timber driveway gates$900 – $1,600 per pair

Worked example: a 20m lapped and capped back fence

A typical Campbelltown rear boundary is about 20 metres. Here is the cost of a new 1.8m lapped and capped treated pine fence, including removal of the old one, and what each neighbour pays when the cost is shared.

20m lapped and capped pine
$2,300 – $3,000
Remove the old fence
$400 – $800
Total job
$2,700 – $3,800
Each neighbour pays (50/50)
$1,350 – $1,900

What the price per metre includes

  • H4 treated pine posts set in concrete footings
  • rails, palings, and capping where the style has it
  • nails and fixings suited to treated timber
  • installation on a clear, level site
  • removal of offcuts and packaging

What changes the price

  • Timber: hardwood costs about a third more than treated pine
  • Style: lapped and capped uses more palings than butted
  • Posts: galvanised steel adds $15 to $25 per metre
  • Slope: stepped sections and plinth boards add labour
  • Access and ground: narrow paths, rock and tree roots slow the dig

Guide prices for Campbelltown and the Macarthur region, October 2026. Your written quote after the free on-site measure is the firm price. Compare timber with other fence types on our services page.

Ready to price your timber fence?

Book a free on-site measure. You get a fixed, itemised written quote, usually within 24 hours.

Choosing your timber

Treated Pine or Hardwood: Which Timber Is Better Value?

Treated pine is the better value for most Campbelltown boundaries. It costs less up front, and its palings last 10 to 15 years. Hardwood, such as spotted gum or blackbutt, costs about a third more, but its palings last 20 years or more and it is allowed on more bush fire prone land.

Treated pine vs hardwood paling fences
Treated pineHardwood
1.8m lapped and capped$115 – $150 /m$160 – $200 /m
Palings last10 to 15 years20 years or more
LookPale and even, weathers to silver-greyWarm brown tones with natural variation
Termites and rotResisted by the preservative treatmentDepends on the species’ natural durability
Bush fire prone landNot permitted where PBP 2019 appliesPermitted, except within 6m of a home or in BAL-29+

Scroll sideways to see the full table.

Both timbers last longest with a stain or oil every 3 to 5 years. Whichever you choose, the posts matter more than the palings, so see the next section before you decide.

Hardwood timber fence with exposed posts and rails
Posts

Timber or Galvanised Steel Posts: Which Should You Choose?

Posts decide how long a timber fence lasts, because they rot or attract termites below ground long before the palings fail. H4 treated pine posts are standard. Galvanised steel posts cost an extra $15 to $25 per metre and outlast timber posts by about a decade.

An H4 treated pine post and a galvanised steel post, each set in a concrete footing below ground. H4 treated pinestandard Galvanised steel+$15 – $25 per metre concrete
Both post types are set in concrete. Steel posts can sit behind the palings, so the fence still looks all-timber.

Choose galvanised steel posts if

  • you want the fence to outlast at least one set of palings
  • the ground stays damp or has a history of termites
  • you plan to replace the palings later without digging new posts
  • the fence is long, so a post failure would mean a big repair

H4 treated pine posts are fine if

  • budget matters most and the ground drains well
  • you prefer the look of timber posts in an exposed-post fence
Sloping blocks

Can You Build a Timber Fence on a Sloping Block?

Yes. On a sloping block, a timber fence is either stepped, with level sections that step down the slope and an H4 treated plinth board closing the gap underneath, or raked, with palings cut to follow the ground. Raking suits gentle slopes, and stepping suits steeper blocks.

Two ways to build a timber fence on a slope: stepped sections with plinth boards filling the gap underneath, or raked palings that follow the ground. Stepped + plinth boardsRaked plinth boards
Stepped: level sections with plinth boards underneath. Raked: palings follow the ground line.

Why plinth boards are worth it

A plinth board is an H4 treated timber board fixed along the base of the fence. On a slope it closes the gap under each stepped section, so pets can’t get through and soil stays put. It also keeps the palings off damp ground, and when it eventually wears it can be replaced without touching the rest of the fence.

Plinth boards cost $20 to $40 per metre. If the ground falls too far for a plinth to hold back, a retaining wall may be needed first. The installer checks this at the measure, so it is on the quote, not added later.

Replacements

Do You Replace Old Timber Fences?

Yes. Most timber fence replacements in Campbelltown take one or two days. The old palings, rails and posts are removed and taken away, new posts are set in concrete, and the new fence goes up on the same line. Removal costs $20 to $40 per metre and is listed on the quote.

Repair it

When the posts are solid and only a few palings or a rail are damaged.

Replace it

When posts are rotten, leaning or loose, or when many palings are split, warped or missing.

Upgrade while you’re at it

A replacement is the cheapest time to move from butted to lapped and capped, or to galvanised steel posts.

Replacing a shared fence? Give your neighbour a fencing notice with the itemised quote first. The next sections explain who pays.

Matching gates

Do You Build Matching Timber Gates?

Yes. Timber gates are built to match the fence, clad with the same palings and capping, and hung on heavy-duty hinges with a latch or drop bolt. A single pedestrian gate costs $350 to $650 installed, and double driveway gates cost $900 to $1,600 a pair.

  • Single gates for side paths, bins and garden access
  • Double gates for driveways, trailers and boats
  • Frames braced against sagging, in timber or steel
  • Hardware including latches, drop bolts and lockable options

Any gate that forms part of a pool barrier must be self-closing and self-latching, so tell the installer if your pool is nearby.

Timber paling gate set in a matching timber fence
Dividing fences

Who Pays for a Timber Dividing Fence?

Neighbours in NSW usually share the cost of a sufficient dividing fence equally under the Dividing Fences Act 1991. In many established Campbelltown streets, the existing standard is a 1.8m timber paling fence. If you want an upgrade, such as lapped and capped or hardwood, you usually pay the extra.

Example: upgrading a shared 20m fence

You and your neighbour agree a butted treated pine fence is sufficient. You would like lapped and capped. You each pay half the butted price, and you pay the difference for the upgrade.

Butted pine, 20m (shared)
$1,840 – $2,400
Each neighbour’s half
$920 – $1,200
Upgrade to lapped and capped
+ $460 – $600
You pay
$1,380 – $1,800

Notices, the one-month response period and what to do if you can’t agree are covered in our fencing FAQs.

Bush fire prone land

Can You Build a Timber Fence on Bush Fire Prone Land?

Sometimes. Where Planning for Bush Fire Protection 2019 applies, new fences on bush fire prone land must be hardwood or non-combustible. Within 6m of a home, or in BAL-29 areas and above, they must be non-combustible only, which rules timber out. Parts of Kentlyn, Wedderburn, Gilead and Appin are bush fire prone.

Check whether your property is bush fire prone with Campbelltown City Council or the NSW Rural Fire Service before you choose a timber. Where timber isn’t allowed, a COLORBOND steel fence is the usual non-combustible alternative, from $92 per metre.

Booking with us

What Do You Get When You Book a Timber Fence With Us?

Every timber fence booked through Starlit Fencing Campbelltown starts with a free on-site measure and a fixed, itemised written quote, usually within 24 hours. A licensed local installer builds it, the workmanship warranty is written into your contract, and the old fence is taken away.

Free on-site measure

The run, slope, access and boundary line are checked before you get a price.

Fixed, itemised quote

Posts, palings, removal and gates are listed separately, ready for a fencing notice.

Licensed installer

Ask for the NSW licence number and check it on the NSW Government licence register.

Written warranty

A workmanship warranty, typically 1 to 3 years, is set out in your contract.

Old fence removed

The old fence and every offcut leave site, and the line is left clean.

One point of contact

We follow up after the job to make sure everything was done as quoted.

Installation

How Is a Timber Fence Installed?

A timber fence is installed in five steps: measure and peg the line, remove the old fence, set the posts in concrete, fix the rails and palings, then add capping and clean up. Most 20m timber fences in Campbelltown are finished in one to two days.

  1. Measure and peg

    The installer confirms the boundary line, height and slope, and pegs out the post positions.

  2. Remove the old fence

    Old palings, rails and posts come out and leave site, if removal is on your quote.

  3. Set the posts

    H4 treated or galvanised posts are set plumb in concrete footings and left to firm up.

  4. Rails and palings

    Rails go on, then the palings are nailed in place, butted or lapped, with plinth boards on slopes.

  5. Cap and clean up

    Capping and gates are fitted, the line is checked with you, and offcuts are taken away.

Service area

Where Do We Install Timber Fencing?

We arrange timber fence installation across the Campbelltown local government area and the wider Macarthur region. That includes established suburbs such as Bradbury, Ruse and Leumeah, where many homes were built with timber boundaries, and newer estates from Glenfield to Appin. Every job starts with a free on-site measure.

  • Campbelltown
  • Bradbury
  • Ruse
  • Leumeah
  • Airds
  • Ambarvale
  • Rosemeadow
  • St Helens Park
  • Glen Alpine
  • Woodbine
  • Kentlyn
  • Ingleburn
  • Minto
  • Glenfield
  • Macquarie Fields
  • Eagle Vale
  • Raby
  • Narellan
  • Mount Annan
  • Camden
  • Oran Park
  • Appin

Don’t see your suburb? See all 48 suburbs on our service areas page, or call to check.

Timber questions

Timber Fencing FAQs

Quick answers to the timber fence questions Campbelltown homeowners ask before they book: partial replacements, matching an old fence, termites, staining, height limits and reusing posts. For general questions, see our full fencing FAQs.

Can you replace just one section of my timber fence?

Yes, if the posts on either side are sound. New palings look brighter than weathered ones for the first year or so, until they weather to a similar grey. If several posts are failing, replacing the whole run usually costs less over time.

Can you match my existing timber fence?

Usually. Treated pine palings, rails and capping come in standard sizes, so a new section can match the style and height of an existing fence. Hardwood and older profiles can be harder to match exactly, and the installer shows you the closest match at the measure.

Is a timber fence termite-proof?

No timber fence is completely termite-proof. H4 treated pine posts resist termites and rot in the ground, and galvanised steel posts remove the in-ground risk altogether. Keep garden beds and mulch off the palings, and check the base of the fence once a year.

Do I need to stain or oil a new timber fence?

It isn’t required, but it helps. A stain or oil every 3 to 5 years slows weathering and cracking, especially in western Sydney sun. Let new treated pine dry out for a few weeks before the first coat.

Can a timber fence be higher than 1.8m?

Yes, but it usually needs council approval. In NSW residential zones, side and rear fences are generally exempt only up to 1.8m, and on a sloping block a stepped fence can reach 2.2m at each step. Check with Campbelltown City Council before building higher.

Can new palings go on my existing posts?

Only if the posts are solid, straight and well set. Most timber fences fail at the posts first, so a fence old enough to need new palings usually needs new posts too. The installer tests the posts at the measure and quotes both options.

Free, no obligation

Get a Free Timber Fencing Quote in Campbelltown

Send the form and we call back the same working day to book your free on-site measure. Photos help us quote faster — attach one if you have it.

  1. 1
    You send the form

    Takes about 40 seconds.

  2. 2
    We call back same working day

    To book a measure that suits you.

  3. 3
    Fixed quote in 24 hours

    Itemised, in writing. The price does not move.

Rather talk it through?

Call 0432 666 474

Request your free measure

Fields marked * are required.

Mobile or landline — whichever suits.
A rough pace-out is fine.
Optional. Speeds the quote up considerably.

We quote free, and no obligation follows it. We pass your details to one licensed local fencing contractor to quote your job, and never sell them. Read our privacy policy.