
Modern aluminium slat, louvre and tubular fences installed across Campbelltown and Macarthur, with privacy slat fences from $200 per metre. Rust-proof, powder-coated in your choice of colour, and spaced for exactly the privacy you want.
We install three kinds of aluminium fence across Campbelltown: horizontal slat fences for modern privacy, vertical slat and louvre fences for feature walls and screening, and tubular or flat-top fences for decorative front yards and security. All are powder-coated aluminium, so they never rust or need painting.
Long aluminium blades laid flat between posts. The clean, modern look in most new Macarthur estates, with the gap set for your privacy.
Upright battens or angled louvre blades. Louvres block the view from most angles while letting air and light through.
Open aluminium pickets for front fences, side returns and security. Low, decorative and easy to see through.
An aluminium slat fence is made of extruded aluminium blades, usually 65mm or 90mm wide and about 16mm thick, fixed between aluminium or steel posts set in concrete. Spacers hold an even gap between the blades, and a capping rail finishes the top. The aluminium is powder-coated in the factory, so the colour is baked on and goes all the way to the edges.

A 1.8m aluminium slat fence in Campbelltown costs $200 to $280 per metre installed with 65mm blades, or $230 to $320 per metre with 90mm blades, including GST. A 1.2m slat front fence costs $150 to $210 per metre, and tubular aluminium starts from $110 per metre.
| Fence | Installed price | Best for |
|---|---|---|
| Horizontal slat, 1.8m, 65mm blades | $200 – $280 | Side and rear privacy |
| Horizontal slat, 1.8m, 90mm blades | $230 – $320 | Bolder look, longer spans |
| Vertical slat or louvre, 1.8m | $260 – $320 | Feature walls and screening |
| Slat front fence, 1.2m | $150 – $210 | Front yards and returns |
| Tubular or flat-top aluminium, 1.2m | $110 – $160 | Decorative front and security fencing |
Scroll sideways to see the full table.
| Item | Price |
|---|---|
| Matching slat pedestrian gate | $550 – $900 each |
| Matching slat double driveway gates | $1,400 – $2,400 per pair |
| Slat privacy screen on an existing fence or wall | $180 – $260 per metre |
| Non-standard powder-coat colour | + $15 – $30 per metre |
| Remove and dispose of the old fence | $20 – $40 per metre |
A typical Campbelltown front boundary is about 15 metres, with a pedestrian gate to the front door. Here is what a new 1.2m horizontal slat front fence costs, fully installed.
Guide prices for Campbelltown and the Macarthur region, October 2026. Your written quote after the free on-site measure is the firm price. Compare aluminium with other fence types on our services page.
Planning a modern slat fence?
Book a free on-site measure. You get a fixed, itemised written quote, usually within 24 hours.
A slat fence gives as much privacy as its gap allows. Tight gaps between the blades give near-full privacy from the street and neighbours, medium gaps balance privacy with airflow, and open gaps screen a view while letting light through. The gap is chosen at the quote and fixed with spacers.
Horizontal slats read as modern and wide. Vertical slats make a fence feel taller. Louvres angle the blades so passers-by can’t see in, while air still flows.
Yes. Aluminium slats are one of the most popular front fences in Campbelltown. In NSW, a front fence on the primary road is generally exempt from approval up to 1.2m high. On a corner block’s secondary road, the fence must be at least 20% open above 400mm, which a gapped slat fence achieves easily.
Side and rear slat fences follow the usual 1.8m exempt limit. If in doubt, check with Campbelltown City Council or Camden Council before you order.
COLORBOND steel is better value for long, plain side and rear boundaries, from $92 per metre. Aluminium slat costs about twice as much but adds a modern, architectural look, airflow and a choice of gap. Many Campbelltown homes use slats at the front and Colorbond down the sides.
| Aluminium slat | COLORBOND steel | |
|---|---|---|
| Installed price (1.8m) | $200 – $320 /m | $92 – $135 /m |
| Look | Modern, architectural lines | Solid, clean sheet panels |
| Privacy | Chosen by the gap | Full privacy |
| Airflow and light | Yes, through the gaps | None |
| Colours | Any powder-coat colour | 15 COLORBOND colours |
| Best for | Front fences, feature walls, courtyards | Long side and rear boundaries |
Scroll sideways to see the full table.
See prices, colours and heights on our Colorbond fencing page.
Aluminium slats can be powder-coated in almost any colour. Satin black, Monument, Woodland Grey and Basalt are the most popular in Campbelltown, because they match COLORBOND roofs and window frames. Light colours like Surfmist and timber-look finishes are also available. Non-standard colours add $15 to $30 per metre.
Screen colours are approximate. Choose from a physical sample outdoors. Matching your gate, letterbox and posts to the slats gives the most finished look.
Yes. Slat gates are built with the same blades, gap and colour as the fence, so the line looks continuous. A matching pedestrian gate costs $550 to $900 installed, and double driveway gates cost $1,400 to $2,400 a pair. Sliding and automated slat gates are quoted on site.

Usually not as the pool barrier itself. Standard horizontal slats can be climbed, so they rarely meet AS 1926.1. Around a pool, use compliant aluminium pool fencing or glass for the barrier, and use slats for privacy screens outside the barrier line or on boundaries that aren’t part of it.
For a compliant barrier from $115 per metre, see our pool fencing and glass pool fencing pages.
Every aluminium fence booked through Starlit Fencing Campbelltown starts with a free on-site measure and a fixed, itemised written quote, usually within 24 hours. A licensed local installer builds it with even, factory-set gaps, the workmanship warranty is written into your contract, and the old fence is taken away.
Heights, gaps, spans and any brick piers or walls are checked before you get a price.
Blades, gates, colour and removal are listed separately, with no surprises.
Choose from physical colour samples and gap options before anything is ordered.
Ask for the NSW licence number and check it on the NSW Government licence register.
A workmanship warranty, typically 1 to 3 years, is set out in your contract.
We follow up after the job to make sure everything was done as quoted.
An aluminium slat fence is installed in five steps: measure the line and confirm the gap and colour, set the posts in concrete at the right span, fix the blades with spacers, add capping and gates, then check the line with you. Most slat fences in Campbelltown take one to two days.
The installer measures the run and confirms blade size, gap and colour with you.
Posts are set plumb in concrete, spaced to suit the blade size, often up to about 2.4m apart.
Blades slide into the post channels, with spacers keeping every gap the same.
Capping finishes the top, and matching gates are hung and adjusted.
The line, gaps and gates are checked with you, and offcuts leave site.
We arrange aluminium and slat fence installation across the Campbelltown local government area and the wider Macarthur region, including newer estates where slat front fences are most popular, such as Gregory Hills, Oran Park, Harrington Park, Spring Farm and Edmondson Park, and established suburbs from Glenfield to Appin.
Don’t see your suburb? See all 48 suburbs on our service areas page, or call to check.
Quick answers to the aluminium and slat fence questions Campbelltown homeowners ask before they book: rust, sagging, brick walls, bush fire prone land, cleaning and adding slats to an existing fence. For general questions, see our full fencing FAQs.
No. Aluminium doesn’t rust, and the powder coat protects the surface. The steel screws and brackets used in good installations are stainless or coated too. Wash the fence every six months to keep the finish clean, especially if it gets garden spray or pool splash.
Not when the posts are spaced correctly for the blade. 90mm blades span further than 65mm blades, and the installer sets post spacing to suit the system, often up to about 2.4m. Very long spans or extra-wide gaps may need a mid support.
Yes. Slat panels can be fixed between brick piers, on top of a low brick or rendered wall, or above a retaining wall. The installer checks the wall at the measure, and the combined height counts towards council height limits.
Aluminium is a metal and doesn’t burn, so it is generally treated as non-combustible, unlike timber. If your property is on bush fire prone land, check the fencing rules that apply with Campbelltown City Council before you order.
Hose it down, wash with a soft brush or cloth and mild soapy water, then rinse. Do this about every six months. Avoid abrasive pads and harsh solvents, which can dull the powder-coat finish.
Often, yes. A slat screen can be fixed above a sound fence as a height extension, or in front of a wall as a feature. Anything above 1.8m on a side or rear boundary usually needs council approval, and a shared fence needs your neighbour’s agreement.
Send the form and we call back the same working day to book your free on-site measure. Photos help us quote faster — attach one if you have it.
Takes about 40 seconds.
To book a measure that suits you.
Itemised, in writing. The price does not move.
Rather talk it through?
Call 0432 666 474Licensed fencing contractors installing Colorbond, timber, pool, glass and aluminium fencing across Campbelltown and the Macarthur region.
Campbelltown, NSW 2560
contact@starlitfencingcampbelltown.com.au
+61 432 666 474
Copyright 2026, Starlit Fencing Campbelltown. All Rights Reserved.