
Compliant aluminium pool fences installed across Campbelltown and Macarthur from $115 per metre. Built to AS 1926.1 with self-closing gates, ready for your council inspection. Failed a pool inspection? We fix that too.
We install three types of pool fence across Campbelltown: aluminium flat-top, the best-value compliant pool fence; aluminium tubular, with rounded pickets; and glass, frameless or semi-frameless, for open views. Every pool fence is built to AS 1926.1-2012 with a self-closing, self-latching gate.
Square pickets finished flush with the top rail. Strong, rust-free and the most popular pool fence in Campbelltown backyards.
Round tubular pickets for a softer look. The same compliance and strength as flat-top, at a similar price.
Toughened glass panels on spigots or mini posts. Keeps the pool in view. See glass pool fencing.
Powder-coated aluminium doesn’t rust, rot or need painting, and it handles chlorinated and salt water splash. Panels arrive pre-made in compliant 1200mm heights with pickets spaced under 100mm, so the fence passes on the numbers inspectors check. It is also the lowest-cost pool fence that meets AS 1926.1.

Aluminium flat-top pool fencing in Campbelltown costs $115 to $165 per metre installed, including GST. Tubular aluminium costs $120 to $170 per metre. A self-closing, self-latching pool gate adds $350 to $600, and glass pool fencing starts from $260 per metre.
| Fence | Installed price | Best for |
|---|---|---|
| Aluminium flat-top, 1.2m | $115 – $165 | Most backyard pools, best value |
| Aluminium tubular, 1.2m | $120 – $170 | A softer, rounded look |
| Semi-frameless glass | from $260 | Open views with a slimline frame |
| Frameless glass | from $345 | Uninterrupted views of the pool |
Scroll sideways to see the full table.
| Item | Price |
|---|---|
| Self-closing, self-latching pool gate | $350 – $600 each |
| Posts core-drilled into concrete or pavers | $25 – $45 per post |
| Remove the old pool fence | $15 – $30 per metre |
| New hinges and latch on an existing gate | $180 – $350 per gate |
A typical Campbelltown in-ground pool needs about 25 metres of fence and one gate, with part of the line on existing pavers. Here is what a new aluminium flat-top pool fence costs.
Guide prices for Campbelltown and the Macarthur region, October 2026. Your written quote after the free on-site measure is the firm price. Compare all fence types on our services page.
Need your pool fenced, or fixed before an inspection?
Book a free on-site measure. You get a fixed, itemised written quote, usually within 24 hours.
A pool fence passes inspection when it meets AS 1926.1-2012. Every fence we install is at least 1200mm high, has no more than 100mm gap at the ground, keeps climbable rails at least 900mm apart, and has a gate that swings away from the pool and self-closes and self-latches.
| Requirement | Measurement |
|---|---|
| Fence height | at least 1200mm |
| Gap at ground level | 100mm or less |
| Gaps between pickets | under 100mm |
| Horizontal rails | at least 900mm apart |
| Non-climbable zone | 900mm outside, 300mm inside |
| Gate latch height | at least 1500mm |
| Boundary fence used as barrier | at least 1800mm |
A pool fence is only half the job. Pots, barbecues, pool pumps and trees within the 900mm zone outside the fence can make a compliant fence fail, so the installer points out anything to move at the handover.
A compliant pool gate swings outward, away from the pool, closes itself from any open position, and latches itself shut. The latch sits at least 1500mm above the ground, out of a child’s reach. A self-closing, self-latching aluminium pool gate costs $350 to $600 installed.
The gate opens outward, so a child pushing on it from outside can’t walk straight through.
Tensioned self-closing hinges pull the gate shut from any angle, even from slightly open.
A magnetic latch, such as the widely used MagnaLatch style, sits high and engages without a slam.
Already have a sound fence but a tired gate? New hinges and a latch cost $180 to $350 per gate, which is often all a failed inspection needs.
Yes. Most failed pool fences in Campbelltown need a small fix rather than a new fence: adjusting or replacing gate hinges and latches, closing gaps under panels, raising a low section, or replacing a damaged panel. We quote after a free check, and the work is usually done in a day.
A council inspector or accredited certifier issues the certificate, not the fencer. Once the work is done, you book the re-inspection with Campbelltown City Council or a private certifier.

To sell a Campbelltown home with a pool, the contract needs a certificate of compliance, a certificate of non-compliance, or a relevant occupation certificate. To lease it, you need a valid certificate of compliance, because a non-compliance certificate can’t be used for a lease. Certificates are generally valid for three years.
Source: Campbelltown City Council (opens in a new tab). Pools must also be registered on the NSW Swimming Pool Register (opens in a new tab).
Yes. A boundary fence can form part of a pool barrier in NSW if it is at least 1800mm high and has no climbable rails or footholds on the pool side. That saves fencing the pool on every side, which is why many Campbelltown pools use the back fence as one edge.
A COLORBOND steel fence works well as a pool boundary, because its only horizontal rails are at the top and bottom, far more than 900mm apart. A lapped and capped timber fence can also work, with its rails on the neighbour’s side. Keep in mind that pool water isn’t covered by the COLORBOND warranty, so rinse off splashes.
Because a boundary fence is shared, your neighbour has to agree to any change in height or style. If the fence is only being raised to suit your pool, you usually pay for that part.
A pool fence is installed in five steps: measure the barrier line and gate position, set the posts in concrete or core-drill them into paving, fit the panels at compliant heights, hang and tension the self-closing gate, then check every measurement with you. Most backyard pool fences take one to two days.
The installer checks the barrier line, the gate position and swing, and anything in the 900mm zone.
Posts are concreted into garden beds, or core-drilled and set into existing concrete and pavers.
Panels go in level or stepped, with the ground gap held at 100mm or less along the whole run.
The gate is hung to swing outward, the hinges are tensioned, and the latch is set at height.
Heights, gaps and the gate are checked with you before the site is cleaned up.
Every pool fence booked through Starlit Fencing Campbelltown starts with a free on-site measure and a fixed, itemised written quote, usually within 24 hours. A licensed local installer builds it to AS 1926.1-2012, the workmanship warranty is written into your contract, and every gate is tested before handover.
The barrier line, gate swing and the 900mm zone are checked before you get a price.
Panels, gates, core-drilling and removal are listed separately, with no surprises.
Heights, gaps, rails and gate hardware are installed to the current standard.
Ask for the NSW licence number and check it on the NSW Government licence register.
The gate is shown closing and latching from every angle before the installer leaves.
We follow up after the job to make sure everything was done as quoted.
We arrange pool fence installation and repairs across the Campbelltown local government area and the wider Macarthur region, from Glenfield and Macquarie Fields in the north to Appin in the south, including pool-heavy estates in Glen Alpine, Mount Annan, Harrington Park and Gregory Hills.
Don’t see your suburb? See all 48 suburbs on our service areas page, or call to check.
Quick answers to the pool fence questions Campbelltown homeowners ask before they book: timing during a pool build, spas, CPR signs, replacing a gate, colours and boundary fences. For general fencing questions, see our full fencing FAQs.
Plan it with the pool builder from the start. A pool needs a compliant barrier as soon as it can hold more than 300mm of water, so the permanent fence usually goes in as the pool is finished, with temporary fencing used during construction.
A spa pool counts as a swimming pool under the Swimming Pools Act 1992. It needs a compliant barrier, or for many spas a lockable, child-resistant lid that meets the regulations. Ask the installer which option suits your spa.
Yes. NSW pools need a resuscitation (CPR) warning sign displayed near the pool, where it can easily be read. It is usually fixed to the pool fence or gate, and inspectors check for it.
Yes, if the rest of the fence is compliant. A new self-closing, self-latching aluminium gate costs $350 to $600 installed. If the gate itself is sound, new hinges and a latch may be enough, at $180 to $350 per gate.
Satin black is the most popular and is standard. White and other powder-coat colours are available, and a matching colour can be chosen for gates and posts. Powder coating doesn’t need painting.
Yes, if you are changing a shared dividing fence, such as raising it to 1800mm to form part of the pool barrier. If the work is only for your pool, you usually pay for it. Talk to your neighbour before the measure.
Send the form and we call back the same working day to book your free on-site measure. Photos help us quote faster — attach one if you have it.
Takes about 40 seconds.
To book a measure that suits you.
Itemised, in writing. The price does not move.
Rather talk it through?
Call 0432 666 474Licensed fencing contractors installing Colorbond, timber, pool, glass and aluminium fencing across Campbelltown and the Macarthur region.
Campbelltown, NSW 2560
contact@starlitfencingcampbelltown.com.au
+61 432 666 474
Copyright 2026, Starlit Fencing Campbelltown. All Rights Reserved.