Frameless glass pool fence on stainless steel spigots beside a backyard pool
Glass pool fencing

Glass Pool Fencing Campbelltown

Frameless and semi-frameless glass pool fences installed across Campbelltown and Macarthur from $260 per metre. 12mm toughened safety glass, soft-close glass gates, built to AS 1926.1 so you see the pool, not the fence.

  • Semi-frameless from $260/m
  • 12mm toughened safety glass
  • Built to AS 1926.1-2012

Glass pool fencing in Campbelltown at a glance

Installed price
From $260 per metre
Frameless glass
12mm toughened, Grade A
Panel height
1200mm
Spigots
316 or 2205 duplex stainless
Glass gate
$650 – $1,000, soft-close
Typical install
One to two days
What we install

What Glass Pool Fences Do We Install in Campbelltown?

We install two types of glass pool fence across Campbelltown: frameless, with 12mm toughened glass panels held by stainless steel spigots and no posts at all, and semi-frameless, with glass panels between slim aluminium posts. Both are built to AS 1926.1-2012 with a self-closing, self-latching glass gate.

Frameless glass

from $345/m

12mm toughened glass on stainless steel spigots, with only the spigots and hinges on show. The clearest view of the pool from the house.

Semi-frameless glass

from $260/m

Glass panels held between slim aluminium mini posts. Most of the open look of frameless, for about a quarter less.

What goes into a glass pool fence

A glass pool fence is a pool safety barrier made of toughened safety glass panels instead of pickets. The panels are about 1200mm high, sit side by side with gaps under 100mm, and are held at the base by stainless steel spigots, a base plate or a concealed channel. A glass gate hangs on soft-close hinges and shuts on a magnetic latch.

  • Glass: Grade A toughened safety glass. Frameless panels are 12mm thick
  • Spigots: 316 marine-grade stainless as standard, or 2205 duplex for salt and heavily chlorinated pools
  • Gate: glass-to-glass soft-close hinges and a magnetic latch out of a child’s reach
  • Mixing materials: glass where you want the view, aluminium pool fencing on the sides you don’t, to cut the cost
Frameless glass pool fence panels on stainless steel spigots
Frameless: just glass, spigots and the gate hardware.
Prices

How Much Does Glass Pool Fencing Cost in Campbelltown?

Glass pool fencing in Campbelltown costs $260 to $380 per metre installed for semi-frameless and $345 to $600 per metre for frameless 12mm glass on core-drilled spigots, including GST. A glass pool gate with soft-close hinges and a latch adds $650 to $1,000.

Glass pool fencing, supplied and installed, per metre (guide prices incl. GST)
FenceInstalled priceBest for
Semi-frameless, aluminium mini posts$260 – $380Best-value glass
Frameless 12mm, core-drilled spigots$345 – $600The most popular glass pool fence
Frameless, base-plated or side-mounted$420 – $700Decks, slabs and retaining walls
Frameless, concealed channel$550 – $920No visible hardware at all

Scroll sideways to see the full table.

Gates and extras (guide prices incl. GST)
ItemPrice
Glass pool gate, soft-close hinges and latch$650 – $1,000 each
2205 duplex spigot upgrade (salt pools)$20 – $40 per spigot
Remove the old pool fence$15 – $30 per metre

Worked example: 20m around a backyard pool

The same Campbelltown pool, with 20 metres of glass and one glass gate, priced two ways. Semi-frameless saves around a quarter. Frameless gives the cleanest view.

20m semi-frameless
$5,200 – $7,600
One glass gate
$650 – $1,000
Semi-frameless total
$5,850 – $8,600
20m frameless, spigots
$6,900 – $12,000
One glass gate
$650 – $1,000
Frameless total
$7,550 – $13,000

What the price per metre includes

  • toughened safety glass panels, cut to suit your layout
  • spigots or mini posts, core-drilled or concreted in
  • all clamps, grommets and fixings
  • installation at compliant heights and gaps
  • a final clean of every panel

What changes the price

  • Mounting: base plates and concealed channel cost more than core-drilled spigots
  • Spigot grade: 2205 duplex adds $20 to $40 per spigot
  • Layout: corners, curves and custom-cut panels add cost
  • Surface: pavers laid on sand may need concrete footings first
  • Gates: each glass gate adds $650 to $1,000

Guide prices for Campbelltown and the Macarthur region, October 2026. Your written quote after the free on-site measure is the firm price. For a lower-cost option, see aluminium pool fencing from $115 per metre.

Want to see your pool through glass?

Book a free on-site measure. You get a fixed, itemised written quote, usually within 24 hours.

Choosing

Frameless or Semi-Frameless: Which Is Better Value?

Semi-frameless glass is better value if budget matters: it costs about a quarter less than frameless and still keeps most of the view. Frameless glass is worth the extra when the pool is a feature of the home, because it has no posts and gives an almost uninterrupted view.

Frameless vs semi-frameless glass pool fencing
Semi-framelessFrameless
Installed price$260 – $380 /m$345 – $600 /m
LookGlass with slim aluminium postsGlass only, no posts
GlassToughened safety glass12mm toughened safety glass
HardwarePowder-coated mini postsStainless steel spigots
CleaningFewer, smaller panelsLarger panels to keep clear
Best forValue, families, sloping sitesFeature pools and open entertaining areas

Scroll sideways to see the full table.

Built to pass

Is Glass Pool Fencing Compliant in NSW?

Yes. Glass pool fencing is fully compliant in NSW when it meets AS 1926.1-2012: panels at least 1200mm high, gaps under 100mm, and a gate that swings away from the pool, self-closes and self-latches. With no horizontal rails, glass has nothing to climb, which makes compliance simple.

Nothing to climb

Smooth glass with no rails or footholds is one of the easiest barriers to keep compliant.

Gaps under 100mm

Panels are set with even gaps between them and at the ground, all under 100mm.

Gate swings out

Glass gates open away from the pool, close on soft-close hinges and latch at least 1500mm high.

The full list of measurements inspectors check, with a diagram, is on our pool fencing page. Remember the 900mm zone outside the fence: pots, furniture and pumps near the glass can still fail an inspection.

Hardware and mounting

Which Spigots and Mounting Should You Choose?

Most glass pool fences in Campbelltown use spigots core-drilled into concrete or pavers, from $345 per metre. Base plates suit slabs and decks where drilling isn’t possible, and a concealed channel hides the hardware completely. Choose 2205 duplex stainless spigots for salt water pools, because it resists corrosion better than 316.

Three ways to mount frameless glass: a spigot core-drilled into concrete, a spigot on a base plate bolted to the surface, and glass set into a concealed channel. Core-drilledfrom $345/mBase platefrom $420/mChannelfrom $550/m
Core-drilled spigots are the most common. The installer checks the slab before choosing.

316 or 2205 duplex stainless?

316 marine-grade stainless steel is the standard spigot and suits most chlorinated pools. For salt water pools, or spigots sitting in regular splash, 2205 duplex stainless resists pitting and tea staining better. It adds about $20 to $40 per spigot.

Finishes

Spigots and hinges come in polished or satin stainless, and in black, which pairs well with dark window frames on modern Macarthur homes in estates like Gregory Hills, Oran Park and Harrington Park.

Glass gates

What Does a Glass Pool Gate Cost?

A glass pool gate in Campbelltown costs $650 to $1,000 installed, including soft-close glass-to-glass hinges and a magnetic latch. The gate swings away from the pool, closes itself from any open position, and latches at least 1500mm above the ground, as AS 1926.1 requires.

  • Soft-close hinges slow the gate as it shuts, so it latches every time without slamming the glass
  • Magnetic latches mount at the top of the gate, out of a child’s reach
  • Hinge panels are thicker or reinforced to carry the gate’s weight
  • Tension is set on site and tested from every opening angle before handover

Gates are the part inspectors test hardest. A gate that doesn’t close or latch on its own is the most common reason a glass fence fails.

Glass pool gate with soft-close glass-to-glass hinges and a magnetic latch
Your site

Can Glass Pool Fencing Go on Pavers, Tiles or a Slope?

Yes. Glass pool fencing can be installed on concrete, tiled or paved surrounds, timber decks, retaining walls and sloping ground. Spigots are core-drilled into solid concrete, base-plated onto slabs and decks, or side-mounted on walls. On a slope, panels step down so every ground gap stays under 100mm.

  • Pavers on sand: spigots need concrete underneath, so small footings are poured where each spigot goes
  • Tiles: diamond core drills cut cleanly through tiles, and the hole is sealed around the spigot
  • Timber decks: base plates bolt through to a structural frame that can take the load
  • Retaining walls: side-mounted spigots fix to the face of the wall, keeping the full deck or path width

The installer checks the surface at the measure, so any footing or reinforcement is on the quote.

Balustrades

Do You Install Glass Balustrades in Campbelltown?

Yes. Frameless glass balustrades for decks, balconies, alfresco areas and stairs are quoted on site. A balustrade is different from a pool fence: in NSW it is needed where a fall exceeds 1m, and it must be at least 1m high on decks and balconies. It uses the same toughened glass and hardware.

Matching balustrade and pool fencing gives a deck or raised pool area a single, continuous look. Where a balustrade also forms part of the pool barrier, it must meet both sets of rules.

Booking with us

What Do You Get When You Book Glass Pool Fencing With Us?

Every glass pool fence booked through Starlit Fencing Campbelltown starts with a free on-site measure and a fixed, itemised written quote, usually within 24 hours. A licensed local installer builds it to AS 1926.1-2012 with toughened safety glass, the gate is tested before handover, and every panel is cleaned.

Free on-site measure

The layout, surface, gate swing and any slope are checked before panels are sized.

Fixed, itemised quote

Panels, spigots, gates and footings are listed separately, with no surprises.

Built to AS 1926.1

Heights, gaps and gate hardware are installed to the current standard.

Licensed installer

Ask for the NSW licence number and check it on the NSW Government licence register.

Gate tested at handover

The gate is shown closing and latching from every angle before the installer leaves.

One point of contact

We follow up after the job to make sure everything was done as quoted.

Installation

How Is a Glass Pool Fence Installed?

A glass pool fence is installed in five steps: measure the layout so every panel can be sized, set the spigots or posts, fit and level the glass, hang and tension the gate, then clean and check every measurement with you. Most glass pool fences take one to two days on site.

  1. Measure and size

    The layout is measured so panels and gaps come out even, and the gate position is confirmed.

  2. Set the hardware

    Spigots are core-drilled and set, or base plates and posts are fixed, all to a string line.

  3. Fit the glass

    Panels are clamped, levelled and spaced with gaps under 100mm along the whole run.

  4. Hang the gate

    The gate is hung to swing outward, the soft-close hinges are tensioned, and the latch is set.

  5. Clean and check

    Every panel is cleaned, and heights, gaps and the gate are checked with you.

Service area

Where Do We Install Glass Pool Fencing?

We arrange glass pool fence installation across the Campbelltown local government area and the wider Macarthur region, including the newer estates where glass is most popular: Gregory Hills, Oran Park, Harrington Park, Spring Farm, Edmondson Park and Menangle Park, and established suburbs from Glen Alpine to Appin.

  • Campbelltown
  • Glen Alpine
  • Mount Annan
  • Harrington Park
  • Gregory Hills
  • Oran Park
  • Currans Hill
  • Narellan
  • Camden
  • Spring Farm
  • Ingleburn
  • Leumeah
  • Bradbury
  • St Helens Park
  • Rosemeadow
  • Kearns
  • Eagle Vale
  • Raby
  • Macquarie Links
  • Edmondson Park
  • Menangle Park
  • Appin

Don’t see your suburb? See all 48 suburbs on our service areas page, or call to check.

Glass questions

Glass Pool Fencing FAQs

Quick answers to the glass pool fence questions Campbelltown homeowners ask before they book: cleaning, safety, mixing glass with aluminium, frosted glass, timing and maintenance. For general fencing questions, see our full fencing FAQs.

How do you keep a glass pool fence clean?

Hose the glass down regularly to rinse off pool water and dust before it dries into spots, then wash with a soft cloth and a glass cleaner or diluted white vinegar. Rinse spigots too, especially on salt water pools. Avoid abrasive pads, which scratch the glass.

Is a glass pool fence safe if the glass breaks?

Pool fencing uses toughened safety glass, which is several times stronger than ordinary glass. In the rare event that it breaks, it shatters into small, blunt granules rather than sharp shards, which greatly reduces the risk of injury.

Can I mix glass with aluminium pool fencing?

Yes, and it is a popular way to save money. Glass goes on the sides you look across from the house or entertaining area, and aluminium pool fencing, from $115 per metre, goes along the sides and back. Both meet the same pool barrier rules.

Can I get frosted or tinted glass?

Clear glass is standard and keeps the pool in view, which is the point of a glass fence for supervision. Frosted, tinted or patterned panels can be quoted for privacy on boundary sections or around a spa.

How soon can a glass pool fence be installed?

Most glass pool fences take one to two days on site. Standard panel sizes are often available quickly, while custom-cut panels for unusual layouts need to be made to order first. Your quote states the expected timing.

Will my glass pool fence need sealing or maintenance?

Toughened glass needs no sealing. Keep it clean, check the gate closes and latches each month, and rinse the spigots and hinges after heavy splash, especially on salt water pools. Hinge tension can be adjusted if the gate starts closing too slowly.

Free, no obligation

Get a Free Glass Pool Fencing Quote in Campbelltown

Send the form and we call back the same working day to book your free on-site measure. Photos help us quote faster — attach one if you have it.

  1. 1
    You send the form

    Takes about 40 seconds.

  2. 2
    We call back same working day

    To book a measure that suits you.

  3. 3
    Fixed quote in 24 hours

    Itemised, in writing. The price does not move.

Rather talk it through?

Call 0432 666 474

Request your free measure

Fields marked * are required.

Mobile or landline — whichever suits.
A rough pace-out is fine.
Optional. Speeds the quote up considerably.

We quote free, and no obligation follows it. We pass your details to one licensed local fencing contractor to quote your job, and never sell them. Read our privacy policy.