Height rules guide

Fence Height Rules in NSW

Every fence height limit that applies to a Sydney home, in plain English: side, rear and front fences, corner blocks, masonry, slopes, retaining walls, lattice extensions, pools, rural and business land, and what to do if you want a taller fence.

  • Updated 20 November 2026
  • 9 min read
  • Checked against the NSW Codes SEPP

Quick answer

In NSW, a side or rear fence can be up to 1.8m high without council approval, or 1.2m if it’s brick or masonry. Front fences, and fences on the street side of a corner block, can be up to 1.2m. A fence stepped on a slope can reach 2.2m at each step. Anything taller usually needs approval.

Key takeaways

  • Side and rear fences: up to 1.8m (masonry up to 1.2m) as exempt development.
  • Front fences and street-side fences on corner blocks: up to 1.2m.
  • On a slope, a stepped 1.8m fence can reach 2.2m at each step.
  • Lattice toppers and extensions count toward the total height.
  • Pool barriers have their own minimums: 1200mm, or 1800mm for a boundary fence used as a barrier.

How High Can a Fence Be in NSW Without Approval?

Without approval, a fence in a NSW residential zone can be up to 1.8m on side and rear boundaries, or 1.2m if it is masonry, and up to 1.2m along the front boundary and the street side of a corner block. These limits come from the exempt development rules in the State’s Codes SEPP.

Maximum fence heights without approval, residential zones (NSW Codes SEPP)
FenceMaximum height
Side and rear boundary fence1.8m
Side and rear fence in masonry1.2m
Front boundary fence1.2m
Street-side fence on a corner block1.2m, partly see-through
Fence stepped on a slope (1.8m fence)2.2m at each step
Fence stepped on a slope (1.2m fence)1.5m at each step

Height is only one of the rules. To be exempt, a fence must also meet the rules on materials, gates, corner-block transparency and bush fire prone land, explained in our council approval guide. If any rule isn’t met, the fence needs approval, whatever its height.

How High Can My Fence Be? Quick Reference by Situation

For most homes, the answer comes down to where the fence is: 1.8m between back and side yards, 1.2m in the front yard and along a corner block’s side street, up to 2.2m at the steps of a fence on a slope, and at least 1.8m for a boundary fence that is also a pool barrier.

Fence height by situation (NSW exempt development, residential zones)
SituationHeight without approval
Back fence between two housesUp to 1.8m
Side fence behind the building lineUp to 1.8m
Side fence between two front yardsUp to 1.2m
Front boundary fenceUp to 1.2m
Side street fence on a corner blockUp to 1.2m, at least 20% see-through above 400mm
Stepped fence on a slopeUp to 2.2m at each step
1.8m fence plus lattice or slat topperOver the limit, approval usually needed
Brick or masonry boundary wallUp to 1.2m
Boundary fence that is also a pool barrierAt least 1.8m (a minimum)

If your situation isn’t in the table, or more than one applies, such as a corner block on a slope, check with council before you build. The installer can also flag height issues at the free measure.

How High Can a Side or Rear Fence Be in NSW?

A side or rear boundary fence in a NSW residential zone can be up to 1.8m high as exempt development. A brick, block or other masonry fence on a side or rear boundary is limited to 1.2m. A taller fence, such as a 2.1m COLORBOND fence, usually needs a development application or a complying development certificate.

The 1.8m limit is why almost every boundary fence in Campbelltown is 1.8m high: it is the tallest fence you can build without approval, and fence panels are made to suit it. A standard COLORBOND or timber paling fence is 1.8m.

  • 1.8m: the standard height for COLORBOND, timber and slat boundary fences
  • 1.5m: sometimes used for low side fences and returns
  • 2.1m: extra privacy, but usually needs approval
  • Masonry: rendered brick or block walls are limited to 1.2m

Prices by height are on our Colorbond fencing page: 1.8m costs $92 to $135 per metre and 2.1m costs $115 to $160 per metre installed.

How High Can a Front Fence Be in NSW?

A front fence in a NSW residential zone can be up to 1.2m high as exempt development. The 1.2m limit applies along the front boundary and within the front setback area, and to the street-side boundary of a corner block. Taller front fences, or solid front fences that don’t meet the other rules, need approval.

The lower limit keeps streets open and lets drivers and pedestrians see each other at driveways. Many homes use a 1.2m aluminium slat or tubular front fence, or a low rendered wall with slat infill, to mark the front boundary without blocking the view.

Popular front fence options under 1.2m (guide prices incl. GST)
Front fencePrice per metre
Aluminium slat, 1.2m$150 – $210
Tubular or flat-top aluminium, 1.2m$110 – $160
COLORBOND, 1.2mQuoted on site

See aluminium slat fencing for front fence options and colours.

What Are the Fence Rules for Corner Blocks?

On a corner block, the fence along the second street frontage is treated like a front fence: it can be up to 1.2m high. To be exempt, it must also be at least 20% transparent above 400mm, and any solid piers or posts can be no wider than 350mm. These rules help drivers see around the corner.

  • Height: up to 1.2m along the secondary road boundary and its setback
  • Transparency: at least 20% see-through above 400mm from the ground
  • Piers: solid piers or posts no wider than 350mm
  • Sight lines: keep the corner clear so drivers can see pedestrians and traffic

Privacy on a corner block

Corner blocks often feel exposed. Aluminium slat with narrow gaps meets the transparency rule while still giving good privacy. A full-height solid fence along the side street needs approval.

How Is Fence Height Measured on a Sloping Block?

Fence height is measured from existing ground level. On a slope, a fence is usually stepped, and each step can be taller on its low side. In NSW, a 1.8m fence that is stepped to suit a slope can generally be up to 2.2m high at each step, and a 1.2m fence up to 1.5m, and still be exempt.

The extra allowance at each step exists because level panels on a slope are always taller at their downhill end. If your slope is steep enough that steps would go over 2.2m, consider smaller panels, a raked fence or a retaining wall. Our sloping block guide compares the options.

Does a Retaining Wall Count Toward Fence Height?

It can. Fence height is measured from existing ground level, so where a fence sits on top of a retaining wall on the boundary, the wall and fence together can take the structure over the 1.8m exempt limit, especially from the neighbour’s lower side. How it is measured depends on the situation, so check with council before you build.

This matters on sloping blocks where a fence sits on top of a retaining wall. A 1.8m fence on a 600mm wall on the boundary may read as a 2.4m structure from the low side, which goes beyond the exempt limit. Separately, retaining walls themselves are only exempt up to 600mm and at least 1m from the boundary.

Get advice before building

Combined walls and fences are a common source of neighbour complaints and council orders. Ask Campbelltown City Council how your wall and fence will be measured before you build, and get the wall designed if it needs to be.

Do Lattice Toppers and Fence Extensions Count Toward the Height?

Yes. A lattice topper, slat extension or privacy screen fixed to the top of a fence is part of the fence, so the total height counts. A 1.8m fence with a 300mm extension is a 2.1m fence, which is over the exempt limit for side and rear fences and usually needs approval.

Extensions are popular because they add privacy without replacing the fence, and they typically cost $45 to $75 per metre on a COLORBOND fence. Because they take the fence over 1.8m, check the approval requirements first, and agree the extension with your neighbour, who sees it too.

How Can You Get More Privacy Without a Taller Fence?

The simplest ways to add privacy without going over 1.8m are planting a hedge or screening plants inside the fence line, using a fence with no gaps such as lapped and capped timber or COLORBOND, adding a pergola or shade structure near the house, or applying for approval for a taller fence or extension.

Close the gaps

Lapped and capped timber or COLORBOND give full privacy at 1.8m. Butted palings open gaps as they dry.

Plant inside the fence

A hedge or screening shrubs inside the yard grow above the fence line over time.

Screen close to the house

A pergola or screen near an outdoor area blocks views where you actually sit.

Apply for more height

A development application or CDC can approve a taller fence where it suits.

Very tall hedges have their own rules. Under the Trees (Disputes Between Neighbours) Act 2006, a neighbour can apply to the Land and Environment Court about hedges of 2.5m or more that severely block sunlight or views.

How High Must a Pool Fence Be?

A pool fence in NSW must be at least 1200mm high, measured from the outside. Where a boundary fence forms part of the pool barrier, it must be at least 1800mm high, with a 900mm non-climbable zone on the pool side. These are minimums under AS 1926.1, not maximums.

Pool barriers are the one case where the rules set a minimum height rather than a maximum. A 1.8m COLORBOND boundary fence can serve as part of a pool barrier if it meets the other requirements. Our NSW pool fence rules guide explains every measurement.

What Are the Fence Height Limits in Rural, Business and Industrial Zones?

In rural and environmental protection zones, exempt fences can be up to 1.8m and must be post and wire or post and rail, with masonry allowed within 3m of the entrance. In business and industrial zones, fences can be up to 3m, or 1.2m for masonry, with extra transparency rules next to homes and along streets.

Exempt fence heights by zone (NSW Codes SEPP)
ZoneMaximum heightExtra rules
Residential1.8m side and rear; 1.2m frontMasonry 1.2m; corner-block transparency
Rural and environmental1.8mPost and wire or post and rail; masonry within 3m of the entrance
Business and industrial3m (masonry 1.2m)75% transparent above 1.8m next to homes, and above 1.2m in a road setback

Scroll sideways to see the full table.

Electric fencing is allowed in rural zones if it meets AS/NZS 3014, but barbed wire and electric fencing aren’t allowed in residential, business or industrial zones, except zone R5. See rural fencing and commercial fencing for those properties.

How Is Fence Height Measured?

Fence height is measured from existing ground level at the base of the fence to the top of the fence, including any capping, lattice or extension. Where the ground is different on each side, or a retaining wall is involved, ask council how they will measure your fence before you build, because practice varies with the situation.

  • measure to the highest point, including capping, post caps and toppers
  • use the existing ground level, not soil or mulch you have added since
  • on a stepped fence, measure each step at its tallest point
  • where a retaining wall is involved, see the section on retaining walls above

What Happens If a Fence Is Built Too High?

If a fence is taller than the exempt limits and wasn’t approved, Campbelltown City Council can order it to be lowered, changed or removed, and fines can apply. Neighbours can report an unapproved fence to council. Unapproved work can also cause problems when the property is sold.

Sometimes a building information certificate from council can regularise unauthorised work, but it isn’t guaranteed and can require changes. It is far cheaper to keep the fence within the limits, or get approval first.

How Do You Get Approval for a Taller Fence?

To build a fence taller than the exempt limits, apply for a complying development certificate if your fence meets the complying development standards, or lodge a development application with council through the NSW Planning Portal. Council considers the height, design, neighbours’ amenity and streetscape, and may notify your neighbours.

Our council approval guide walks through each pathway, what plans you need and how to check the controls for your property. Agree the fence with your neighbour too: a taller dividing fence is usually paid for by the owner who wants the extra height.

Frequently Asked Questions

Is a 2m fence allowed in NSW?

Not as exempt development on most residential side and rear boundaries, where the limit is 1.8m. A 2m or 2.1m fence usually needs a development application or complying development certificate. On a slope, a stepped 1.8m fence can reach 2.2m at individual steps.

Can my neighbour build a fence higher than 1.8m?

Only with approval, unless it’s a stepped fence on a slope within the 2.2m step limit. If your neighbour builds a taller fence without approval, you can raise it with Campbelltown City Council. If it’s a dividing fence, the Dividing Fences Act also applies.

Can I put a trellis on top of my fence?

Yes, but it counts toward the fence height. A trellis that takes a side or rear fence over 1.8m usually needs approval. A free-standing trellis or screen set back inside your yard may be treated differently, so check with council.

How high can a fence be between two front yards?

Generally up to 1.2m within the front setback area, the same as the front boundary fence. Behind the building line, side fences can be up to 1.8m.

Is there a height limit for hedges?

There is no fence-style height limit for hedges, but under the Trees (Disputes Between Neighbours) Act 2006, a neighbour can apply to the Land and Environment Court about hedges 2.5m or taller that severely obstruct sunlight or views.

Do the height rules apply to temporary fencing?

Temporary construction fencing is covered by separate rules for building sites. Once the build is finished, any permanent fence must meet the normal height limits.

Sources

  1. Exempt development: fences (NSW Planning Portal) (opens in a new tab)
  2. State Environmental Planning Policy (Exempt and Complying Development Codes) 2008 (opens in a new tab)
  3. Fences: rules for exempt and complying development (Wentworth Shire Council fact sheet) (opens in a new tab)
  4. Earthworks, retaining walls and structural supports (NSW Department of Planning) (opens in a new tab)
  5. Trees (Disputes Between Neighbours) Act 2006 (NSW) (opens in a new tab)

Related services and guides